Smart Evo2
The most complete switchboard for pump and drainage systems ever

SMART EVO 2 is Elentek's best selling electrical panel as it is suitable for multiple applications for both clean water (emptying, filling, pressurizing) and dirty water (emptying and disposing of wastewater) systems.
Compact, economical and easy to install and use.

General features
• Single phase power supply 100-240Vac 50/60Hz (SMART EVO-Mono);
• Power supply 3F 310-450Vac 50/60Hz (SMART EVO-Tri);
• G/P1 and G/P2 inputs normally open;
• T1 and T2 motor click inputs;
• 2 green LEDs automatically on;
• 2 green LEDs motors active;
• 2 red LEDs motor overload alarm / minimum current alarm;
• 2 red LEDs motor click activation alarm;
• GA input normally open for alarm activation;
• AUTOMATIC-0-MANUAL buttons (unstable);
• DIP-SWITCH switches for:
enable level alarm of probes;
thermal intervention delay 5/10 seconds;
alarm output setting;
motor click alarm reset enable;
filling/emptying;
enable start/stop floats;
enable card activation delay from network return
motor changer activation 3 inputs for unipolar level probes (COM-MIN-MAX);
• Self-test against jamming (2 sec. every 48 hours);
• Green LED for mains on/off or incorrect phase sequence;
• 2 green LEDs automatically on;
• 2 green LEDs motors active;
• 2 red LEDs motor overload alarm / minimum current alarm;
• 2 red LEDs motor click activation alarm;
• Maximum current electronic control for overload with assisted calibration;
• Minimum current electronic control for dry running with assisted calibration;
• Automatic reset for minimum current alarm;
• Enable return motor delay timer;
• Auxiliary and motor protection with fuses;
• Cumulative dry contact alarm output (COM-NO-NC resistive load - 5A / 250V);
• Cumulative voltage alarm output (12Vdc/ 100mA);
• Door lock main switch;
• Arrangement for running capacitors for single-phase version (not included);
• ABS housing, IP55;
• Ambient temperature: -5/+40 °C;
• Relative humidity 50% at 40°C (non-condensing).